Share it
The SKW3000 module uses a MT7981A + MT7976C + MT7531AE. It compliant 802.11a/b/g/n/ax Wi-Fi6 solution, which integrates a dual-core MIPS1004Kc (880 MHz), 3-port GBE switch, USB2.0/3.0, SD-XC.
Read More| CPU | MTK7981 (1200MHz) |
| RF | 2.4G: MT7531AE / 5G: MT7531AE |
| Dimension | 75mm x 60mm x 20 mm |
The SKW3000 module uses a MT7981A + MT7976C + MT7531AE. It compliant 802.11a/b/g/n/ax Wi-Fi6 solution, which integrates a dual-core MIPS1004Kc (880 MHz), 3-port GBE switch, USB2.0/3.0, SD-XC. This module is suitable for 802.11ac, LTE cat4 / 5, edge, hot spot, VPN, AC (access control). For consumer electronics, the module only requires an external 5V power supply.The module integrates a 2.4 GHz 2x2 MIMO WLAN chip with in-house PA and LNA, and integrates a 5 GHz 3x3 MIMO WLAN chip with in-house PA and LNA. It supports 144Mbps for 20 MHz channels, 300Mbps for 40 MHz channels, and 866Mbps 5 GHz operations for 160 MHz channels.This module supports the bridging mode, the AP / client mode, and the gateway mode.
Product Features：
◆ 32KB L1 I-Cache and 32KB L1 D-Cache
◆ 256KB unified L2 Cache
◆ External memory interface: DDR3 2GB
◆NOR (SPI), NAND Flash (SPI)
WLAN
◆ Set success rate detector, support Tx power control
◆ Configurable Wi-Fi2.4/5 GHz PA to achieve higher efficiency in low-power applications.
| System and hardware information | |
| Module | SKW3000 |
| Product Description | IEEE 2x2/2G,3x3/5G 11n/ac/ax dual band dual concurrent access point |
| CPU | MTK7981 (1200MHz) |
| RF | 2.4G: MT7531AE 5G: MT7531AE |
| PHY | MT7976C |
| Flash Memory | (16MBx1 SPI NOR flash) 128MBx1 NAND flash |
| Internal storage | DDR3 2Gb |
| Radio | |
| 2x2/2G | IEEE 802.11b/g/n/ac/ax MIMO 2x2
2.4~2.4835 GHz |
| 3x3/5G | IEEE 802.11a/n/ac/ax MIMO 2x2 5.15~5.850GHz Modulation IEEE802.11a/n: OFDM (BPSK, QPSK, 16-QAM, 64-QAM) IEEE802.11acOFDM (BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM) IEEE 802.11ax: OFDM (BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM,1024 -QAM) Channels IEEE 802.11a: Operation in channels 36-165 IEEE 802.11n: HT20 and HT40 IEEE 802.11ac: HT20, HT40, and HT80 IEEE 802.11ax: HT20, HT40, and HT80 Data Rate: IEEE 11a: 54/48/36/24/18/12/9/6Mbps IEEE 11n: 20MHz: 6.5Mbps~144.44Mbps 40MHz: 13.5Mbps~300Mbps 11ac: 20MHz: 6.5Mbps~173.3Mbps 40MHz: 13.5Mbps~400Mbps 80MHz: 29.3Mbps~867Mbps IEEE 11ax: 20MHz: 8.6Mbps~286.8Mbps 40MHz: 17.2Mbps~573.5Mbps 80MHz: 36Mbps~1201Mbps 160MHz: 1700Mbps |
| The Gigabit Ethernet port | |
| Gigabit Ethernet | LANx4: 10/100/1000 auto-sensing (MDI/MDX)
WAN: 10/100/1000 auto-sensing (MDI/MDX) |
| Other connectors and designs | |
| USB | USB2.0; USB 3.0 BUS |
| UART | UARTx2 |
| Power | |
| Power adapter | DC 4.5—12.0V, 3A |
| Environmental temperature and humidity | |
| Operation temperature | Fan heat dissipation can increase the upper limit） |
| Storage temperature | -40~105℃ |
| Working humidity | 5% to 95%（noncondensing） |
| Storage humidity | 5% to 95%（noncondensing） |
◆ Wireless router
◆ Wireless repeater
◆ Home automation
◆ NAS equipment
◆ Home Security Gateway
◆ An Internet service router
Copyrights© Shenzhen Skylab Co.,LTD All Rights Reserved.
