Share it
UWB staff card tags support 25-30 meters long-distance positioning and ranging. VDU1501 integrates DW1000 and nRF52832, supports TWR/TDOA positioning algorithm, and the positioning accuracy is 10-30 cm.
Read More| Chip | nrf52832/DW1000 |
| Positioning accuracy | 10-30cm |
| Positioning distance | 25-50 m |
UWB indoor positioning staff tag VDU1501, the main control chip adopts nrf52832, which can realize low-power standby. The positioning scheme adopts DW1000 to realize the TDOA indoor high-precision algorithm based on UWB.
VDU1501 can realize the high-precision indoor positioning of wearing personnel. The built-in accelerometer can intelligently switch the positioning frequency of people moving and stationary. In addition, the employee card has the SOS button for help function, which can realize the monitoring and positioning of personnel in the nursing home.
Instructions for use：
(1) Power on
Press and hold the button until the blue light turns on. Release the button, the blue light will stay on for 3s and then turn off, indicating that the boot is successful. The card will be turned on when charging.
(2) SOS for help
After the work card is successfully turned on, pressing the button will indicate an emergency call for help.
(3) Shut down
After powering on, press the button 3 times continuously. The interval between each time is about 1s, and the last long press, the red light turns on and then turns off, indicating that the shutdown is successful.
(4) Charging
Insert one end of the matching charging cable into the 5V DC charging adapter, and align the other end with the charging interface seat by magnetic force. The red light starts flashing at a frequency of 1s, and when fully charged, the blue light will light up, indicating that it is fully charged. After removing the charger, the blue light turns off.
|
Parameter
|
Description
|
|
Motion refresh frequency
|
1Hz
|
|
Static refresh frequency
|
0.33Hz
|
|
Power consumption
|
Standby: 20uA, TX standard power: 150mA, RX: 50mA
|
|
Precision
|
CEP90：30cm
|
|
General using time when fully charged
|
2 weeks@1Hz（Gain=0x4a @25℃）
|
|
Positioning distance
|
>300m(Max TX power）
|
|
Positioning distance
|
>300m(Max TX power）
|
|
Battery capacity
|
550mAh
|
|
Temperature
|
Operational: -20~80℃, Charging: 0~45℃, Storage: -20~40℃(<3month)
|
|
Dimension
|
85mm*54mm*7.5mm(±1mm)
|
|
UWB Parameter
|
Description
|
|
Frequency
|
Default 3.9936±0.25GHz(with PA/LNA),support all channels ch1-5(Without PA)
|
|
Protocol
|
IEEE 802.15.4-2011 UW
|
|
BLE Parameter
|
Default off after 30 seconds
|
|
RAM and ROM
|
512 KB flash/64 KB RAM 256 KB flash/32 KB RAM
|
|
Protocol
|
Support BLE5.0 (No Longrange)
|
|
Frequency
|
2400MHz---2483.5MHz
|
|
Input
|
AC 100~240V 50/60Hz 0.35A
|
|
Output
|
DC 5V /1A
|
UWB positioning tags are often used for high-precision personnel positioning management. There are two common scenarios:
（1）VDU1501R is used for high-precision UWB positioning, as shown in the following figure.
(2)VDU1501R does high-precision TWR two-way ranging, which can realize collision avoidance warning of people and vehicles.
Copyrights© Shenzhen Skylab Co.,LTD All Rights Reserved.
