Share it
GNSS Module

LS-TM8N

High Performance GNSS Integrated Module LS-TM8N

Positioning accuracy 3.0m
Receiver Type GPS ,BDS,GLONASS
Dimension(L×W×H) 16*12.2*2.4(mm)
Read More

The LS-TM8N is a high-performance GNSS all-in-one solution module that features super sensitivity,ultra-low power, and a small form factor.

The LS-TM8N is a high-performance GNSS all-in-one solution module that features super sensitivity,ultra-low power, and a small form factor. The RF signal is applied to the antenna input of the module, and a complete serial data message with position, velocity and time information is presented at the serial interface with UBX protocol or NMEA protocol. It is based on the high-performance features single-chip architecture, Its –162dBm tracking sensitivity extends positioning coverage into places like urban canyons and dense foliage environments where the GNSS was not possible before. It Built-in low-field magnetic sensor.

Features:

◆GPS/GLONASS/BDS/GALILEO/QZSS receiver

◆Ultra high sensitivity: -162dBm

◆Extremely fast TTFF at low signal level

◆±10ns high accuracy time pulse (1PPS)

◆Assisted GNSS

◆SBAS (WAAS,EGNOS,GAGAN,MSAS)

◆Support A-GPS

◆RoHS compliance (Lead-free)

◆FCC,CE compliance

 

Technical
Parameter describe Performance
Receiver Type GPS,GLONASS,BD
Sensitivity Tracking -162dBm Typical
Acquisition -148dBm Typical
Precision Position 3.0m CEP50 without SA
Velocity 0.1m/s
TTFF Cold Start 32s(Typical Open Sky)
Hot Start 1s
Power Consumption Tracking 28mA @3.3V Typical
Acquisition 30mA @3.3V
Navigation Data Update Rate Max 10Hz Default 1Hz
Operational Limits Altitude Max 18,000m
Velocity Max 500m/s
Acceleration Less than 4g
Application

◆ LBS (Location Based Service)

◆ PND (Portable Navigation Device)

◆ Vehicle navigation system

◆ Aeromodelling

Q&A
1. who are we?
We are based in Guangdong, China, start from 2006,sell to North America(30.00%),Eastern Europe(15.00%),Western Europe(15.00%),Northern Europe(14.00%),Oceania(5.00%),South Asia(5.00%),Domestic Market(5.00%),South America(4.00%),Southeast Asia(3.00%),Africa(00.00%),Mid East(00.00%),Central America(00.00%),Southern Europe(00.00%).
2. how can we guarantee quality?
Always a pre-production sample before mass production; Always final Inspection before shipment;
icon_up
close_white