Share it
GNSS Module

SKM80F

MT3331 Small Size GNSS Positioning Module SKM80F

The SKM80F is a high-performance GNSS all-in-one solution module that features super sensitivity, ultra low power and small form factor.

Read More
Accuracy <2.5m
Receiver Type GPS/BDS/GLONASS
Dimension(L×W×H) 25*25*8.2(mm)

The SKM80F is a high-performance GNSS all-in-one solution module that features super sensitivity, ultra low power and small form factor. The RF signal is applied to the antenna input of module, and a complete serial data message with position, velocity and time information is presented at the serial interface with NMEA protocol or custom protocol.

It is based on the high performance features of the Airoha AG3331 single-chip architecture, Its –165dBm tracking sensitivity extends positioning coverage into place like urban canyons and dense foliage environment where the GNSS was not possible before.

Features:

◆GPS only or BDS only or GPS+BDS or GPS+GLONASS

◆ Ultra high sensitivity: -165dBm

◆ Extremely fast TTFF at low signal level

◆ Built-in 12 multi-tone active interference canceller

◆ Ultra low power consumption

◆ Advanced Features: AlwaysLocate; AIC; EPO;EASY

◆ SBAS (WAAS,EGNOS,MSAS,GAGAN)

◆RoHS compliance (Lead-free)

◆ FCC,CE compliance

Specification
Parameter Specification
Receiver Type GPS only or GPS+BDS or GPS+GLONASS
Sensitivity Tracking -165dBm Typical
Acquisition -148dBm Typical
Accuracy Position <2.5m CEP50 (Typical Open Sky)
Velocity 0.1m/s without SA
Acquisition Time Cold Start 23s(Typical Open Sky)
Warm Start 2-3s
Hot Start 1s
Re-Acquisition <1s
Auxiliary GPS support EPO
Power consumption Tracking 35mA @5V Typical
Acquisition 40mA @5V
Maximum update rate Max 10Hz Default 5Hz
Operational limitations Altitude Max 18,000m
Velocity Max 515m/s
Acceleration Less than 4g
Application

◆ LBS (Location Based Service)

◆ PND (Portable Navigation Device)

◆ Vehicle navigation system

◆  Aeromodelling

Q&A
1. who are we?
We are based in Guangdong, China, start from 2006,sell to North America(30.00%),Eastern Europe(15.00%),Western Europe(15.00%),Northern Europe(14.00%),Oceania(5.00%),South Asia(5.00%),Domestic Market(5.00%),South America(4.00%),Southeast Asia(3.00%),Africa(00.00%),Mid East(00.00%),Central America(00.00%),Southern Europe(00.00%).
2. how can we guarantee quality?
Always a pre-production sample before mass production; Always final Inspection before shipment;
icon_up
close_white