Various control applications based on wireless modules are realized through communication interfaces. The wireless module provides UART and several GPIO interfaces. GPIO and PWM can be used for intelligent control, and UART and SPI interfaces are used for device communication. Among them, the theoretical rate of SPI interface can reach a quarter of the system bus rate. It is much higher than UART, GPIO and other interfaces, and is widely used in high-speed communication.
For the high-speed communication needs in various applications, SKYLAB has launched a variety of WiFi modules that support SPI interface. I introduce several WiFi modules that support SPI interface through this article.
SPI interface is a synchronous serial communication method proposed by MOTOROLA. It is mainly used for high-speed, serial communication between microprocessors and peripheral devices. It can be directly connected to a variety of standard peripheral devices produced by various manufacturers. These include FLASHRAM, network controllers, LCD display drivers, A/D converters and MCUs.
SKYLAB SPI interface WiFi modules include SKW77, SKW78, SKW92A, SKW92B, SKW93A and other products.
SKW77 is a high power wifi router solution module. The module is compatible with 802.11b/g/n, RF adopts 2x2 MIMO, the maximum rate can reach 300Mbps. wifi module internal integration of two-way PA and LNA, each transmitter output power up to +28dBm or more. The effective data transmission distance in open area can reach more than 1000 meters. Users can easily realize long-distance data transmission with it.
SKW78 is a 1000Mbps high-speed wireless router module. The module is compliant with 802.11a/b/g/n/ac Wi-Fi standard. It integrates 3 Gigabit speed WAN ports or LAN ports , 2xMIMO 2.4GHz 802.11b/g/n WIFI and 2xMIMO 5GHz 802.11a/g/n/ac WIFI. A 3.3V supply is all that is required on the electronic device.
The SKW92A integrates an 802.11n MAC and baseband, a 2.4GHz wireless radio and front-end module. It also has a 580MHz MIPS CPU, a high-speed Ethernet PHY. And it requires only a 3.3V external power supply for the WiFi module to operate. It is suitable for low power consumption, low cost, high integration AP electronic devices.
The main chip of SKW92B is MT7688A of MTK platform, which is a 1T1R wireless device compliant with 802.11n Wi-Fi standard. It contains a 580MHz MIPS CPU, 1x High Speed Ethernet PHY, 1x USB2.0 host device, I2C/PCM and multiple low speed IOS. SKW92B provides two working modes including IOT gateway and IOT device mode.
SKW93A is a high performance and highly integrated wireless AP WiFi module.SKW93A can work on both 2.4GHz and 5GHz dual band simultaneously. In 2.4G band, it can transmit up to 300Mbps and in 5G band, it can transmit up to 433Mbps.The WiFi module transmits high definition video in real time.SKW93A module supports AP, Client, Repeater and Serial WiFi.
If you want to use as a gateway with SPI interface WiFi module, you can choose WiFi module SKW92.
If it is a WiFi module with SPI interface you want to use for big data transmission, you can choose SKW78 or SKW93A.
If it's a WiFi module with SPI interface you want to use for long distance video transmission, you can choose SKW77.
The bridge connecting the Bluetooth world and the network Bluetooth gateway
2024-11-21UWB ranging module: principle, composition, characteristics, applications, and common products
2024-11-19Personnel positioning in the blasting area and electronic fence system to ensure safe operations
2024-11-19
Copyrights© Shenzhen Skylab Co.,LTD All Rights Reserved.
